|
|
|
1.
|
Choose a suitable position of the wall
to install the product. The power cord could be set in the left or
right side but shall be keep balance and on the lowest level of the
frame. |
|
|
2.
|
First of all, loosen the screws within
the fixed support; then, pull out and cover the fixed band on the
steel tube. Insert the fixed band to the original position and turn
round the fixed support behind the frame. |
|
3.
|
Put the towel rack dryer on the smooth
ground and check whether all the fixed supports are on the parallel
position and fasten the screws. |
|
4.
|
Move the towel rack to the
selected position of the wall and mark the position of the holes of
the screws, drill holes and insert the plastic bolts into the holes.
At last, fasten the wooden screws. |
|
|
|
The users may apply the towel dryer
to dry the wet, cold hand towel, bath towel, underwear, socks and
handkerchief etc. to keep your clothes dry anytime; then, you do
not have to worry about the rainy day.
|
|
|
1.
|
Please use the product within
the range of the voltage that is indicated in the instruction. |
|
2.
|
Do not put anything stained
with volatility liquid like gasoline or alcohol on the product to
prevent fire. |
|
3.
|
Do not garner up the product
before the product still has remaining temperature. |
|
4.
|
Do not put the product in
any liquid to prevent a short circuit. |
|
5.
|
Please consult with the
distributors whom you purchase the product from to keep in good repair. |
|
6.
|
Do not let children to shake
the wall type towel dryer to prevent falling down of the product.
|
|
7.
|
The product should not be
installed in the position where inflammable gas may be produced, such
as, the place leaves with gas. |
|
